Rowson’s Plumbing Services is a proudly Western Australian owned and family-operated business providing commercial, industrial and residential plumbing services throughout the Perth metropolitan area. Established in 1998, the company has built a strong reputation for professional workmanship, reliability, safety and customer service. Available 24 hours a day, seven days a week, Rowson’s provides commercial plumbing maintenance, emergency plumbing, blocked-drain clearing and CCTV inspections, gas services, hot water systems, leak detection, backflow prevention, strata plumbing and pump installation, servicing and repairs. The team is supported by ongoing in-house training and holds Master Plumbers Association membership, Waterwise Plumber recognition and WPCG accreditation. Rowson’s is a multi-award-winning business, including the 2023 MPA Business of the Year for Commercial Maintenance Plumbing and Gas, reflecting its commitment to quality, compliance and long-term client relationships.
Gas Hot Water Systems in Perth, WA 6000
O’Brien Plumbing Perth. Established in 2010 by Matt Latham under the tradename Liquid Allsorts Plumbing Solutions, we joined the O’Brien national network of expert Electricians and Plumbers in 2019. This started a new promising chapter of our business as we rebranded to O’Brien Plumbing Perth. Prior to this, Matt Latham already had extensive training and gas fitting experience, completing an apprenticeship involving commercial and new home plumbing in 2003. Matt then set about mastering various aspects of his trade such as new homes, commercial shop fit-outs and commercial and residential maintenance, and working in Perth on many of the new and old high rise buildings. With over 15 years of skills and experience, Matt has been able to provide cost-effective solutions for a variety of plumbing issues and effectively lead the business to the success it has gained in the plumbing industry up to today. O’Brien Plumbing Perth’s ultimate goal is to raise the bar in Western Australia for customer service and satisfaction. Our “client for life” attitude has earned us a reputation for high levels of customer service and quality workmanship. Today, we can proudly say that we have become the go-to plumbing contractor in the area and many of our clients are actually repeat customers.
Advertise with us
Refined Plumbing & Gas is a Perth based family company that was established in 1997 by Rod Bailey. Rod and his team have over 20 years’ experience in all aspects of plumbing with a focus on maintenance plumbing. All of our plumbers and office staff are very experienced and knowledgeable providing professional and friendly service. We strive to offer excellent service taking pride in our work and commitment to quality servicing for the insurance industry and real estate property management sectors primarily.
At Majestic Plumbing, we support the high-performance needs of industrial and infrastructure facilities with reliable, safety-first plumbing solutions. Whether it’s a large-scale factory, a mining site, or an airport terminal, we understand the complexities of these environments and deliver services built for efficiency, compliance, and minimal disruption.. With over 40 years of experience, we have built a reputation for excellence, reliability, and innovation in commercial and industrial plumbing. Businesses across Perth trust us to deliver high-quality solutions that ensure compliance, efficiency, and long-term performance.
Perth Plumbing Co is a family-owned and operated plumbing and gasfitting business servicing residential, commercial and industrial clients throughout Perth and the wider metropolitan area. The business provides a comprehensive range of plumbing, gas, drainage and hot water services, including emergency plumbing, leak detection, blocked drains, pipe relining, backflow testing, renovations and new construction. With licensed and insured tradespeople and 24/7 emergency availability, Perth Plumbing Co focuses on quality workmanship, honest advice and reliable plumbing solutions.
Boeing Plumbing is a Western Australian plumbing business and part of the ABN Group, providing plumbing services to ABN Group’s residential building brands and a range of external residential and commercial clients. Created in 1978 to service the needs of ABN Group’s residential builders, Boeing Plumbing has grown into one of the largest domestic plumbing operations in Western Australia. With services across maintenance plumbing, gas fitting, renovations plumbing and light commercial work, Boeing Plumbing supports builders, homeowners and commercial clients with reliable plumbing solutions backed by ABN Group’s integrated construction network. The business provides plumbing services to brands including Homebuyers Centre, Celebration Homes, Dale Alcock Homes, Dale Alcock Homes South West and Webb & Brown-Neaves
Find the right hot water service
Reliable hot water starts with the right information
No hot water, changing temperatures or an appliance fault can disrupt everyday routines at home. Gas hot water systems sit within the wider hot water system in a property, where heated water is generated, stored or delivered to outlets.
Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with the Master Plumbers and Gasfitters Association of Western Australia. It is a practical place to choose a plumbing business when a gas hot water system needs attention, replacement or consideration as part of a home project.
How gas hot water systems are arranged
A gas hot water system may be a round storage cylinder or a rectangular wall-mounted continuous-flow unit. It may be found outside against a wall, in a service recess or in a plant area. Depending on the appliance, customers may see water pipes, a gas pipe, a burner or heat exchanger, and either a flue or outdoor combustion clearance.
A gas storage hot water system heats and holds water in its cylinder. A continuous-flow unit heats water as it passes through the appliance. The existing system type, its condition and the household’s circumstances are useful starting points for a conversation about a repair, replacement or gas hot water system installation.
Signs that warrant a closer look
A change in hot water performance does not identify the cause on its own, but it gives a plumbing business a useful description of what is happening. Common concerns reported with gas hot water systems include:
- no hot water or only lukewarm water;
- pilot or ignition failure, lockouts or error codes;
- a leaking tank or relief valve discharge;
- fluctuating temperature at outlets;
- noisy operation, thermostat faults or poor gas pressure; and
- sooting, flame issues or a smell of gas.
Describe what has changed, when it occurs and whether there have been recent changes around the installation. That is more useful than trying to diagnose the appliance remotely.
Repair, replacement or a new installation?
The right pathway depends on the asset, the reported symptoms, access, isolation points and the consequence of the system not operating. A plumbing business may first determine whether the situation is suited to a service call, a planned repair or a larger scoped item.
For a gas hot water heater repair, share the fault code or visible symptoms where possible, along with photos or a short video. If you are considering gas hot water system replacement, details of the existing appliance and its location help establish the starting point. For a new installation, the available information about the proposed appliance, gas type and surrounding area can make the initial discussion more productive.
Do not assume that an appliance with a familiar appearance has the same requirements as the current unit. A considered discussion with a plumbing business is the better way to understand the work involved for the particular property.
Details to have ready before you make contact
A concise description helps a Master Plumber or plumbing business understand the situation sooner and decide what information matters next. Gather what you can without delaying contact:
- Confirm whether the system uses natural gas or LPG bottled gas.
- Note the make, model, serial number, approximate age and system type, or photograph the data plate.
- Take clear photos of the appliance, surrounding area, relevant labels and any error code.
- Describe the symptom plainly: for example, no hot water, temperature fluctuation, a leak, noise or a lockout.
- Provide the property address, contact person and practical access instructions.
- Explain whether the area is occupied and note any urgency, safety concern, water or gas isolation status, smell of gas, soot or flame issue.
Where available, photos of a gas bayonet, meter, regulator or bottle bank may also assist the initial conversation. An installation manual can be useful too.
Products and names you may encounter
Customers researching gas hot water systems may encounter appliance names such as Rinnai, Rheem, Bosch, Dux, Thermann, Aquamax and Vulcan. Reece, Galvins and Tradelink are also names associated with product systems and supply channels relevant to this service. These are examples customers may encounter while identifying an existing appliance or considering options; they do not indicate a recommendation, supply arrangement or service capability for any particular plumbing business.
Choosing a plumbing business with confidence
When a gas appliance is involved, clear communication about the system and its symptoms matters. Ask the plumbing business what information will help them understand the job, and make sure the discussion reflects the appliance actually installed at the property.
Find a Master Plumber is backed by the Master Plumbers and Gasfitters Association of Western Australia. Choosing a Master Plumber helps consumers make a more informed choice of plumbing business for their property or project. The Association has represented Western Australia’s plumbing and gasfitting industry since 1901, and its members must adhere to the Association’s Code of Conduct, which sets expectations for honest transactions, ethical business behaviour, lawful plumbing practice, cooperation within the industry and apprentice training.
Related hot water choices
A gas system is one option within residential hot water. If your household is comparing system types or the existing appliance uses another energy source, the broader hot water service family may be a useful next step. More specific pathways are available for gas instant hot water, electric hot water systems, heat pump hot water systems, solar hot water systems and tempering valve work.
Questions about gas hot water systems
What are the main types of gas hot water systems?
Gas systems may be round storage cylinders or rectangular wall-mounted continuous-flow units. Storage systems heat and hold water, while continuous-flow units heat water as it passes through the appliance.
What should I report if my gas hot water is not working?
Share the symptoms, such as no hot water, lukewarm water, an error code, a lockout, a leak, noise or fluctuating outlet temperature. Photos of the appliance, data plate and any displayed code can also help.
What information helps when replacing a gas hot water system?
Provide the existing appliance make, model, serial number, approximate age, system type, gas type and photos of the appliance and surrounding area. Property access details and the impact of the failure are also useful.
Should I mention a gas smell or soot?
Yes. Tell the plumbing business about any smell of gas, soot, flame issue, lockout or recent change to the installation, along with the water or gas isolation status if known.
Can Find a Master Plumber help me choose a plumbing business?
Yes. Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with Master Plumbers WA, helping customers choose a plumbing business for their service needs.
For a broader view of household hot water options, explore Hot Water Systems. If your existing appliance is a continuous-flow model, Gas Instant Hot Water may be the more relevant next choice.