Griggs Plumbing & Gas is a Collie-based plumbing and gas fitting business servicing residential, commercial and local property clients across Collie and surrounding South West areas. The business provides practical plumbing and gas support with a focus on reliable workmanship, professional service and regional trade experience. As a Master Plumbers member business, Griggs Plumbing & Gas is positioned within the Western Australian plumbing industry as a professional provider supporting homeowners, businesses and property owners with plumbing repairs, maintenance, installations and gas fitting services.
Tempering Valve Installation
My Plumber WA is a Karrinyup-based plumbing business providing reliable residential, strata, property maintenance and emergency plumbing services across Perth. Led by Vince Audino, the business focuses on prompt response times, clear communication, quality workmanship and practical plumbing solutions for homeowners, tenants, property managers and small commercial clients. Services include emergency plumbing, leak repairs, blocked drains, hot water systems, toilet repairs and replacements, fixture installation, water filtration, gas plumbing and general maintenance. My Plumber WA is known for its friendly local service, professional approach and commitment to leaving every job completed properly, cleanly and with care.
Advertise with us
Reef Plumbing & Gas is a Broome-based plumbing and gas fitting contractor delivering professional plumbing services throughout the Kimberley and regional Western Australia. The business specialises in commercial, industrial and housing construction plumbing, while also providing maintenance, drainage, gas fitting, hot water systems and backflow prevention services for residential and commercial clients. With extensive experience working in regional and remote environments, Reef Plumbing & Gas has built a reputation for reliable workmanship, practical solutions and quality customer service. As a member of the Master Plumbers and Gasfitters Association WA, the company is committed to maintaining high standards of professionalism, safety and compliance across every project.
APG Plus is a South West-based plumbing, gas, electrical and facility maintenance business operating from East Picton and servicing Bunbury, surrounding towns and wider WA. Established in 1991, APG Plus provides residential, commercial and industrial plumbing and gas services, supported by experienced tradespeople, strong customer service and a broad capability across maintenance, construction, repairs and asset management. The business is well suited to homeowners, commercial property owners, builders, facility managers, industrial clients, aged care facilities, health care providers and businesses requiring reliable planned or reactive maintenance. APG Plus’ services include plumbing and drainage, gas fitting, hot water systems, backflow prevention, roof plumbing, drainage, pump stations, fire pump sets, wet fire systems, filtration, electrical maintenance and general building maintenance. With 24/7 phone availability and strong South West capability, APG Plus provides a practical one-stop service for plumbing, gas and maintenance needs.
Link Plumbing & Gas Service is a trusted Western Australian plumbing and gas contractor providing professional residential, commercial and government plumbing services throughout the Perth metropolitan area. With more than 36 years of industry experience, the company is recognised for its fast response, quality workmanship and specialist expertise in hot water systems, plumbing maintenance and gas services. As an accredited Rheem Service Agent, Link Plumbing & Gas Service combines experienced licensed plumbers and gas fitters with a customer-first approach, offering same-day service where possible, 24/7 emergency assistance and dependable plumbing solutions backed by professional workmanship and transparent pricing.
AJL Plumbing & Gas is a family owned and operated plumbing and gas fitting business based in Midvale, Western Australia. Led by Alan and Jamie, the company brings more than 30 years of experience in the plumbing and gas industry, providing prompt service and quality workmanship for residential and commercial clients.
At Bonza Complete Plumbing and Gas, our core belief revolves around people. We promise not to overcharge you or push unnecessary services. That’s just how friends treat each other! As skilled plumbers and genuinely good people, we always provide straightforward advice. If you need a plumber in the southern suburbs, don’t settle for just anyone – reach out to us!
Pearl Plumbing and Gas is a locally based plumbing and gasfitting business servicing Burekup, Bunbury and surrounding South West communities. The business provides a broad range of residential and commercial services, including general plumbing maintenance, gasfitting, blocked drains, hot water systems, renovations, construction plumbing and backflow prevention. With experience across maintenance, repairs and new installations, Pearl Plumbing and Gas offers practical plumbing and gas solutions for homeowners, builders, property managers and local businesses. Pearl Plumbing and Gas is also a member of the Master Plumbers and Gasfitters Association of Western Australia, demonstrating its connection with the state’s professional plumbing and gasfitting industry.
VTPG (VT Plumbing Group) is a Perth-based commercial plumbing and maintenance contractor delivering plumbing, gas and hydraulic services across commercial, construction, government and residential sectors. Founded by Jake Veaudry and Steven Tompsett, the business has grown into a well-established team of more than 40 staff, including experienced project managers, licensed tradespeople and apprentices. Training, development and staff retention remain key focuses of the business. VTPG specialises in commercial plumbing construction, building maintenance, gas services, drainage, fire services, backflow prevention and hydraulic infrastructure projects, while also providing reactive maintenance and residential plumbing support. Known for its professionalism, efficiency and strong safety culture, VTPG combines modern project management systems, quality workmanship and a customer-focused approach to deliver reliable plumbing solutions across Perth. With extensive industry experience, a growing apprentice workforce and a commitment to continuous improvement, VTPG has built a reputation for delivering high-quality outcomes across both service and project work.
Nemjon Contracting is a Western Australian family-owned and operated plumbing, gas fitting and civil contracting company delivering large-scale commercial, civil, mining and resource sector projects across Western Australia. With more than 70 years of collective industry experience and over 20 years of delivering premium contracting services, the company has built a reputation for quality workmanship, flexible project delivery and dependable service. Nemjon specialises in commercial plumbing, gas fitting, civil earthworks, piping, underground services and turnkey project management, providing integrated solutions from Perth to the Pilbara.
Commercial hot water systems often serve many outlets, rooms or parts of a property. When a tempering valve is being installed, replaced or added to an outlet group, the work needs to be considered alongside the hot water plant, the surrounding pipework and how the building uses hot water.
A tempering valve blends hot water with cold water before the water reaches taps, showers or fixture groups. This allows water stored at a higher temperature to be delivered at a lower temperature for general use. In a commercial setting, the valve may form one part of a larger plant with storage, pumps, controls and connected valves.
Where a tempering valve may be installed
Valve location depends on the system arrangement and the outlets being served. A compact brass valve may be fitted near a hot water unit or storage cylinder, in a service cupboard, around a fixture group or within a plant area. Pipework changes may be needed to suit the selected location.
Commercial hot water plant can be found in basement plant rooms, rooftop plant areas, external compounds, laundries, commercial kitchens, mechanical services rooms and dedicated hot water enclosures. Knowing where the relevant equipment sits helps a plumbing business understand access and plan the installation conversation.
What installation work can involve
Tempering valve installation can involve fitting a new valve to a hot water system or undertaking a commercial tempering valve replacement where an older valve needs to be changed. The work may relate to electric, gas, solar or heat pump hot water systems, as well as temperature control for a particular fixture group.
Depending on the arrangement, associated work may include alterations to pipework and installation of components such as isolation valves, check valves, strainers, pressure-limiting valves, expansion control valves or test points. Outlet temperature setting, commissioning and recording valve details for future maintenance may also be part of the work.
These details are not automatic inclusions on every job. They depend on the existing system and the requirements identified by the plumbing business.
Commercial hot water plant needs practical site context
Commercial hot water tempering valve installation is commonly part of a plant that supplies multiple fixtures, tenancies, rooms or apartments. The same broader system may include gas-fired water heaters, storage tanks, heat pumps, solar pre-heat tanks, circulating pumps, expansion vessels, relief valves, control panels and building management system connections.
That is why it is useful to distinguish an issue at one outlet from a requirement affecting a wider fixture group or building area. It also helps to identify whether the planned work is a new installation, a replacement, or an alteration linked to other hot water plant work.
Prepare useful information before approaching a plumbing business
Clear information supports a more productive discussion about commercial hot water system tempering valve installation. Gather what is readily available rather than trying to diagnose the system yourself.
- Identify the site address, plant-room or equipment location and the outlets affected.
- Note the hot water unit make, model and serial number if available.
- Take photos of the unit, valve area, surrounding pipework and any data plates.
- Confirm whether the system is electric, gas, solar or heat pump.
- Explain whether the requirement relates to one outlet, a fixture group or a larger area.
- Share access restrictions, permitted working times and any shutdown window.
- Name the person authorised to approve the installation.
For commercial and industrial sites, asset IDs, past service records, site induction requirements and relevant drawings or manuals can also be useful. Where site controls apply, provide relevant information about permits, isolations or operational impacts.
Choosing a Master Plumber for the work
Tempering valve work may sit within a wider commercial hot water decision, particularly where equipment, pipework and building access need to be coordinated. Explain the scope as clearly as possible and use Find a Master Plumber to choose a plumbing business for the service.
Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with the Master Plumbers and Gasfitters Association of Western Australia. The directory is backed by the Association, which has represented Western Australia's plumbing and gasfitting industry since 1901. Choosing a Master Plumber helps consumers make a more informed choice of plumbing business for their property or project.
Brands and products you may encounter
Equipment labels, valve bodies and supply documentation may feature names such as RMC, AVG, Enware, Rada, Caleffi, Aquablend, Watts and Reliance. Reece, Galvins and Tradelink are also examples customers may encounter through plumbing supply channels. These names can be useful identifiers when sharing photographs or existing equipment details with a plumbing business.
Brand names are examples only. Their presence on site does not determine what work is required or which product is suitable for a particular commercial hot water system.
Related commercial hot water work
A tempering valve installation may be considered alongside other work on commercial hot water plant. If the main requirement is different, the following service pathways may be more relevant:
- Tempering Valve Repairs and Maintenance for an existing valve requiring attention.
- Thermostatic Mixing Valve Installation where a thermostatic mixing valve is the relevant component.
- Hot Water Circulating Pump Installation for planned circulating-pump work.
- Commercial Hot Water Systems for the broader plant and connected service options.
Frequently asked questions
What does a tempering valve do?
A tempering valve blends hot water with cold water before it reaches taps, showers or fixture groups. It can allow stored hot water to remain at a higher temperature while water is delivered at a lower temperature for general use.
Where might a tempering valve be located?
It may be installed near a hot water unit, storage cylinder, under-bench heater, fixture group, service cupboard or plant area. The appropriate location depends on the system and the outlets involved.
Can a tempering valve be installed on different hot water systems?
The service can relate to electric, gas, solar and heat pump hot water systems. A plumbing business will need to consider the specific plant and pipework arrangement.
What is helpful to provide for a commercial tempering valve replacement?
Useful details include photos of the equipment and surrounding pipework, hot water unit make, model and serial number, the plant location, the affected outlets, access requirements and any shutdown restrictions.
Is a tempering valve the same as a thermostatic mixing valve?
No. A tempering valve is generally less complex than a thermostatic mixing valve. The relevant component depends on the system and the intended application.