APG Plus is a South West-based plumbing, gas, electrical and facility maintenance business operating from East Picton and servicing Bunbury, surrounding towns and wider WA. Established in 1991, APG Plus provides residential, commercial and industrial plumbing and gas services, supported by experienced tradespeople, strong customer service and a broad capability across maintenance, construction, repairs and asset management. The business is well suited to homeowners, commercial property owners, builders, facility managers, industrial clients, aged care facilities, health care providers and businesses requiring reliable planned or reactive maintenance. APG Plus’ services include plumbing and drainage, gas fitting, hot water systems, backflow prevention, roof plumbing, drainage, pump stations, fire pump sets, wet fire systems, filtration, electrical maintenance and general building maintenance. With 24/7 phone availability and strong South West capability, APG Plus provides a practical one-stop service for plumbing, gas and maintenance needs.
Pump Control System Repairs and Maintenance
Rickwood Plumbing & Gas is a family-owned plumbing and gas fitting business delivering professional plumbing services throughout Bunbury, Busselton, Dunsborough, Margaret River, Capel, Augusta and the wider South West of Western Australia. The business provides 24/7 emergency plumbing, general maintenance, gas fitting, hot water systems, blocked drains, leak repairs and renovation plumbing for residential and commercial clients. Fully licensed and committed to quality workmanship, Rickwood Plumbing & Gas has built a reputation for honest advice, reliable service and fast response times across the region. As an MPGA member, Rickwood Plumbing & Gas is dedicated to delivering safe, compliant and high-quality plumbing and gas solutions that customers can rely on.
Advertise with us
Koormal Contracting is Western Australia's largest Indigenous-owned plumbing contractor based in Bunbury, delivering specialist plumbing, gas fitting, civil drainage and asset maintenance services throughout regional and remote Western Australia. The company services the commercial, utilities, mining and government sectors, combining technical expertise with a strong commitment to Indigenous engagement, culture and community outcomes. Owned and operated by Gavin "Possum" McGuire and Michael Jones, Koormal Contracting brings together more than 50 years of combined experience in remote and regional project delivery. The business has built a reputation for quality workmanship, safety, reliability and successfully delivering complex infrastructure and maintenance projects across Western Australia.
Pro-Plumb is a family owned and operated local business based in Kununurra, proudly servicing the Kimberley region and parts of the Northern Territory. Our experienced team are passionate and hardworking, committed to delivering quality plumbing, drainage, and gas fitting services with reliability and care. With roots in the community and a strong work ethic, we take pride in offering personalised service backed by local knowledge and expertise. Whether it is a big project or quick fix Pro-plumb is here to get the job done.
Cooke & Dowsett is a national commercial and industrial plumbing business with a Western Australian office based in Malaga. The company services the construction industry across a wide range of sectors, including accommodation, commercial, defence, education, health, infrastructure, retail, sports and leisure. With a history dating back to 1992, Cooke & Dowsett has built a strong reputation for delivering professional plumbing services on major construction projects across Australia and New Zealand. The business specialises in commercial plumbing, design and construction, hydraulic systems, gas services, fire services, civil drainage, prefabrication and project management of plumbing services.
MI Plumbers are highly skilled commercial plumbers who take pride in completing works in a safe and professional manner to the highest of standards. Our modern day approach to plumbing construction means that your project benefits from the latest materials and techniques. We are the industry leaders in high quality construction plumbing, commercial maintenance and retail fit-outs. We remain at the forefront of plumbing technology and our experience allows us to recommend the right products and installation methods for your projects. Perth’s leading facility mangers rely on us to maintain and manage their assets through our cloud based systems. We specialise in difficult, ongoing issues and provide preventative maintenance to avoid costly interruptions and repair bills. Whatever the task, we can design and install a custom plumbing solution that’s right for you.
Snap Plumbing & Construction is a Western Australian owned plumbing, gas and maintenance contractor with more than 20 years of experience servicing commercial, healthcare, aged care, education and construction sectors. Based in Malaga, the business provides commercial plumbing, gas fitting, preventative maintenance, asset management, CCTV drainage services and 24/7 emergency response throughout the Perth metropolitan area. Known for its customer-focused approach and specialist expertise in healthcare and aged care environments, Snap Plumbing has built a strong reputation for delivering reliable, compliant and high-quality plumbing solutions across a diverse range of industries.
Rodgers Plumbing is a Western Australian plumbing contractor operating as part of The Rodgers Group of Companies Pty Ltd, delivering commercial plumbing, maintenance, drainage, gas fitting, and backflow prevention services throughout metropolitan Perth and regional Western Australia and National if required. Led by Cameron Rodgers, Managing Director and licensed plumber and gasfitter with more than 30 years of industry experience, the company is recognised for providing reliable, professional, and compliant plumbing solutions across projects of all sizes. Specialising in Domestic, Industrial and Commercial Plumbing, Drainage Installation and Repairs Gas Fitting Services fitting and testing Backflow Prevention Testing and installation CCTV Drain Inspections Water Jetting and Drain Cleaning Civil and Underground Plumbing Works Hydraulic Consulting National, Regional and Metropolitan Project Delivery With experienced leadership, qualified personnel, robust safety systems, and extensive equipment resources, Rodgers Plumbing has the capability to successfully deliver small, medium, and large-scale plumbing projects across Western Australia.
IFM Group is a Naval Base-based industrial plumbing, civil, building and maintenance business servicing commercial, industrial, mining, processing and project-based clients across Perth and Western Australia. The business provides practical trade support across industrial plumbing, maintenance, civil works, mechanical services, electrical works, shutdown services and building solutions. As a Master Plumbers member business, IFM Group is positioned within the Western Australian plumbing and maintenance industry as a professional provider supporting industrial facilities, commercial operations, mining-related sites and processing environments with reliable trade services, maintenance capability and project support.
Urbico Plumbing & Gas is a Perth based licensed plumbing contractor delivering high-quality commercial, residential, and specialist plumbing solutions across Perth’s northern suburbs and surrounding regions. With over 25 years of industry experience, Urbico is led by a fully licensed tradesman with an extensive background in plumbing, gas fitting, heating, and hydronic systems.
Find a Master Plumber for pump control systems
A pump issue can affect more than the pump itself. The control system determines when equipment starts and stops, responds to operating signals and can raise alarms when something is not working as expected. For a business, facility or industrial site, a fault may need to be understood in relation to the pump, the surrounding equipment, the plant location and the site’s operating requirements.
Pump Control System Repairs and Maintenance sits within commercial and industrial pumps and pumping equipment. It focuses on the controls that support pump operation, rather than treating every pump fault as a pump-only problem.
What a pump control system does
A pump control system is commonly an electrical control panel, pressure controller, float controller or variable speed drive. It may be positioned near the pump, in a plant room, switchboard area or weatherproof enclosure.
The controller responds to pressure, level, flow or demand signals. This allows the pump to start, stop, alarm or change speed when required. In a duty/standby arrangement, control communication between pumps can also be an important part of operation.
Signs that may prompt pump control system repairs
Different sites and systems behave differently, but a control system may warrant investigation when there is an alarm condition, an unexpected change in pump operation or a visible issue at the panel or associated controls. Useful observations to report include:
- an alarm from the controller;
- a pump that runs continuously or does not run at all;
- tripped overloads;
- failed floats or probes;
- damaged pressure switches;
- variable speed drive faults;
- water damage to a panel;
- settings that appear incorrect; or
- poor communication between pumps in a duty/standby set.
These signs do not confirm the cause of a fault. They do, however, give a plumbing business a clearer starting point when considering pump control system repairs.
Repair and maintenance work starts with the cause
Effective pump control panel repairs and maintenance begins by looking for the cause of the failure before parts are replaced. A reported alarm, damaged component or pump behaviour may be linked to the panel, a pressure, level, flow or demand signal, system settings, or communication between pumps.
This approach helps frame the decision around the condition of the broader system. It also recognises practical factors such as the age of equipment, previous repairs, available spare parts, plant-room access and whether the fault is intermittent or constant.
Where a site has ongoing reliability concerns, pump control system maintenance can provide an opportunity to review recorded faults, prior service information and the current condition of the relevant equipment.
Information that helps before work is considered
Clear asset and site information can help a plumbing business understand the issue and plan for access. Gather what is readily available:
- Identify the asset: note the pump make, model, duty label and controller type, plus any asset ID or plant-room reference.
- Record what is happening: note when the fault began, whether it is intermittent or constant, the alarm condition and whether the pump runs continuously or not at all.
- Share useful visuals: photos or short videos of the controller, alarm, data plate, surrounding pipework and the affected area can be useful.
- Bring together history: provide drawings, manuals, the last service report, maintenance history, warranty information and details of recent repairs where available.
- Explain site conditions: include the property address, contact person, access instructions, occupancy, permitted working hours, parking or loading arrangements and any site induction requirements.
For industrial locations, it may also be important to identify shutdown windows, isolation requirements, safety permits, environmental controls, confined-space risks, hot works requirements and potential impacts on production.
Choosing the right plumbing business for a site-based issue
Commercial and industrial pumping equipment can be located in plant rooms, switchboard areas, weatherproof enclosures and other controlled-access parts of a site. When selecting a plumbing business, it is useful to describe the asset, the observed fault and the access or operating constraints that may shape the work.
Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with the Master Plumbers and Gasfitters Association of Western Australia. Choosing a Master Plumber helps consumers make a more informed choice of plumbing business for their property or project.
The Association has represented Western Australia’s plumbing and gasfitting industry since 1901. Its members must adhere to the Association’s Code of Conduct, which sets expectations for honest transactions, ethical business behaviour, lawful plumbing practice, cooperation within the industry and apprentice training.
Brands and products you may encounter
Equipment labels, manuals, existing panels and supply records may refer to a range of brands and products. Examples customers may encounter include Grundfos, Davey, Onga, Lowara, DAB, Wilo, Flygt, Xylem, Sulzer and Bermad. Supply channels and associated product names may also include Reece, Galvins, Tradelink and Allied Pumps.
These names can be useful details to pass on when discussing a pump control panel repair or maintenance concern. Their presence on site does not by itself determine the cause of a fault or the appropriate repair approach.
Related pump and site services
A control-system concern may sit alongside a broader pumping-equipment decision. Depending on the equipment and the issue identified, you may also need to consider pump repairs and maintenance, pump rebuilds, pump installation, variable speed pressure system repairs and maintenance, or work involving sewer or storm water pump stations.
- Pump Repairs and Maintenance for issues involving the pump equipment itself.
- Pump Control System Installation where a control-system installation is being considered.
- Variable Speed Pressure System (VSPS) Repairs and Maintenance for relevant variable-speed pressure equipment.
- Pumps and Pumping Equipment for the wider commercial and industrial service family.
Frequently asked questions
What is a pump control system?
It is commonly an electrical control panel, pressure controller, float controller or variable speed drive that controls when a pump starts, stops, alarms or changes speed.
What can trigger a pump control system fault?
Reported issues can include alarms, failed floats or probes, tripped overloads, damaged pressure switches, variable speed drive faults, water-damaged panels, incorrect settings and communication problems in duty/standby pump sets.
What should I provide when seeking pump control system repairs?
Where available, provide the asset make, model and serial number, controller details, photos of labels or alarms, when the fault began, service history and relevant site access information.
Why does a plumbing business need site access details?
Plant location, induction requirements, permitted working hours, parking or loading arrangements, shutdown restrictions and site controls can affect how work is planned.
Can a pump that runs continuously be related to the controls?
Continuous operation is one useful observation to report. It does not establish the cause on its own, as the controller responds to pressure, level, flow or demand signals.
How can Find a Master Plumber help?
Find a Master Plumber is backed by the Master Plumbers and Gasfitters Association of Western Australia and can be used to choose a plumbing business for a service need.
Use Find a Master Plumber to choose a plumbing business for pump control system repairs and maintenance at a commercial or industrial site. Sharing the available asset, fault and access information can support a more informed discussion.