Bunbury Plumbing Services is a Bunbury-based plumbing and controlled waste services business providing residential, commercial and regional plumbing support across Bunbury and the South West. Originally established in 1990 as Bunbury Plumbing Services, the business has grown from a dedicated maintenance plumbing provider into BPS (WA) Pty Ltd, offering plumbing, emergency repairs, appliance installations, solar water heaters, sewer conversions, backflow testing, septic waste services and potable water cartage. With a strong focus on reliable service, customer care and quality workmanship, Bunbury Plumbing Services supports clients with both everyday plumbing needs and larger service requirements. The business operates a modern fleet including controlled waste tankers, excavators, tip trucks, low loaders, potable water tankers and other specialist equipment, allowing the team to complete work efficiently and safely across a wide range of sites.
Gas / Heat Pump Plant Installations
Rodgers Plumbing is a Western Australian plumbing contractor operating as part of The Rodgers Group of Companies Pty Ltd, delivering commercial plumbing, maintenance, drainage, gas fitting, and backflow prevention services throughout metropolitan Perth and regional Western Australia and National if required. Led by Cameron Rodgers, Managing Director and licensed plumber and gasfitter with more than 30 years of industry experience, the company is recognised for providing reliable, professional, and compliant plumbing solutions across projects of all sizes. Specialising in Domestic, Industrial and Commercial Plumbing, Drainage Installation and Repairs Gas Fitting Services fitting and testing Backflow Prevention Testing and installation CCTV Drain Inspections Water Jetting and Drain Cleaning Civil and Underground Plumbing Works Hydraulic Consulting National, Regional and Metropolitan Project Delivery With experienced leadership, qualified personnel, robust safety systems, and extensive equipment resources, Rodgers Plumbing has the capability to successfully deliver small, medium, and large-scale plumbing projects across Western Australia.
Advertise with us
Dorrington Plumbing, Gas & Electrical is a Jolimont-based plumbing, gas and electrical business servicing residential, commercial and property management clients across Perth. The business provides practical trade support across plumbing, gas fitting, hot water systems, water filters, electrical services, air conditioning and emergency after-hours work. As a second-generation trades business operating since 1994, Dorrington Plumbing, Gas & Electrical has built a strong reputation for prompt, reliable and professional service. The company supports Perth homeowners, businesses and property managers with repairs, maintenance, installations and general service work delivered by qualified plumbers, gas fitters and electricians
AJL Plumbing & Gas is a family owned and operated plumbing and gas fitting business based in Midvale, Western Australia. Led by Alan and Jamie, the company brings more than 30 years of experience in the plumbing and gas industry, providing prompt service and quality workmanship for residential and commercial clients.
Proactive Plumbing & Gas is a family-owned and operated plumbing and gas fitting business servicing residential and commercial customers throughout the Perth metropolitan area. Based in Wellard, the business is led by licensed plumber and gas fitter Rohan Laverty, who is committed to providing quality workmanship with a personal touch. The company offers a comprehensive range of services including emergency plumbing, plumbing maintenance, gas fitting, hot water systems, blocked drains, leak repairs and water filtration, delivering prompt and reliable solutions backed by honest advice and competitive pricing. Built on strong customer relationships and a reputation for professionalism, Proactive Plumbing & Gas prides itself on delivering dependable service, quality workmanship and value for money on every project. As a member of the Master Plumbers and Gasfitters Association WA, the business is committed to maintaining high standards of safety, compliance and professionalism while supporting homeowners and businesses across Perth.
Link Plumbing & Gas Service is a trusted Western Australian plumbing and gas contractor providing professional residential, commercial and government plumbing services throughout the Perth metropolitan area. With more than 36 years of industry experience, the company is recognised for its fast response, quality workmanship and specialist expertise in hot water systems, plumbing maintenance and gas services. As an accredited Rheem Service Agent, Link Plumbing & Gas Service combines experienced licensed plumbers and gas fitters with a customer-first approach, offering same-day service where possible, 24/7 emergency assistance and dependable plumbing solutions backed by professional workmanship and transparent pricing.
Rickwood Plumbing & Gas is a family-owned plumbing and gas fitting business delivering professional plumbing services throughout Bunbury, Busselton, Dunsborough, Margaret River, Capel, Augusta and the wider South West of Western Australia. The business provides 24/7 emergency plumbing, general maintenance, gas fitting, hot water systems, blocked drains, leak repairs and renovation plumbing for residential and commercial clients. Fully licensed and committed to quality workmanship, Rickwood Plumbing & Gas has built a reputation for honest advice, reliable service and fast response times across the region. As an MPGA member, Rickwood Plumbing & Gas is dedicated to delivering safe, compliant and high-quality plumbing and gas solutions that customers can rely on.
Pureco Plumbing Group is a Perth-based plumbing and gas fitting company providing residential, commercial and industrial plumbing services across the metropolitan area. The business specialises in maintenance, repairs, gas fitting, hot water systems, drainage solutions, leak detection and construction plumbing. Known for responsive service, quality workmanship and a strong focus on compliance, Pureco Plumbing Group delivers practical plumbing solutions for homeowners, businesses and builders throughout Perth.
Freeflo Plumbing & Gas Pty Ltd is a Forrestdale-based plumbing and gas fitting business servicing residential and commercial clients across Perth and wider Western Australia. The business provides practical plumbing, gas fitting, hot water and drainage support, with a focus on reliable service, quality workmanship and responsive customer care. As a Master Plumbers member business, Freeflo Plumbing & Gas supports homeowners, businesses and property owners with plumbing maintenance, blocked drains, leaking taps, leaking pipes, hot water systems, gas installations, stormwater drains and general plumbing services.
Triple T Plumbing and Civil is a Western Australian-owned contractor specialising in commercial hydraulics, plumbing and civil drainage services for major construction and development projects. Based in Balcatta and operating across Perth and WA, Triple T has more than 25 years of industry experience and delivers hydraulic and civil solutions for commercial, residential, industrial, infrastructure, aged care, health and education projects. The company provides a broad range of services including commercial plumbing, civil drainage, stormwater and sewer systems, wet fire services, siphonic drainage, rainwater harvesting, Water Corporation sewer and water extensions, and design-and-construct hydraulic packages. Led by Managing Director Peter Banovich, Triple T is known for technical capability, reliable project delivery, strong project management and a collaborative approach with builders, developers and construction partners. The business places a strong focus on quality, safety, accountability and delivering high-standard project outcomes.
Plan commercial hot water plant around the site
A commercial hot water plant installation is rarely a simple swap of one unit for another. Larger systems may serve multiple fixtures, tenancies, rooms or operational areas, and can involve more than one connected component. A clear brief gives a plumbing business a better starting point for considering the proposed plant, its location and the practical constraints of the site.
Gas / heat pump plant installations are part of commercial hot water systems. Depending on the proposed arrangement, the work may relate to gas-fired water heating plant or a heat pump water heater. The right conversation starts with what the site needs, where the plant is proposed and how people will access, operate and maintain it after installation.
Understanding heat pump water heater plant
A heat pump water heater is usually a cylinder with a refrigeration-style compressor unit attached or located nearby. It draws heat from surrounding air and transfers that heat into water stored in the tank. For that reason, it is commonly located outside or in a ventilated plant area.
The equipment uses a compressor, fan, evaporator and heat exchanger. Its placement is an important practical consideration: the proposed area needs to suit the plant layout, access and ventilation arrangements. Existing services nearby, site access and the eventual maintenance approach are useful matters to raise early.
What a commercial hot water plant installation may involve
Commercial hot water plant can be made up of several connected components rather than one standalone cylinder. Depending on the system, customers may encounter storage tanks, heat pumps, gas-fired water heaters, circulating pumps, valves, relief valves, control equipment and insulated pipework.
For a commercial hot water plant installation, a plumbing business will usually confirm the duty or layout first, then consider isolation, access, supports, falls, clearances, commissioning requirements and how the completed system will be maintained. These matters are especially relevant where plant is located in a basement plant room, rooftop area, external compound, service cupboard, laundry, commercial kitchen, mechanical services room or dedicated enclosure.
A commercial gas hot water system installation may have different plant and site considerations from a commercial heat pump hot water system installation. Explaining the intended system, the building area it is expected to serve and any project constraints helps keep the discussion focused on the proposed work.
Details to have ready before contacting a plumbing business
Good site information can help a Master Plumber or plumbing business understand the project before attending. It is useful to prepare what is already available rather than trying to resolve every detail in advance.
- Drawings, specifications or photos of the proposed plant location.
- The preferred product or fixture service, if one has already been selected.
- Access dimensions, nearby existing services and known isolation points.
- The site address, a contact person and practical access instructions.
- Timing requirements, tenant access or project-program constraints.
- Site induction requirements, parking or loading details, and permitted working hours.
- For existing equipment, photos of labels or data plates, plus available make, model and serial-number information.
On industrial sites, it may also be important to identify shutdown windows, permit requirements, process impacts, environmental controls or critical production considerations. These details give the plumbing business context for planning around site operations.
Questions worth asking during installation planning
Installation decisions are easier to compare when the discussion is specific to the property and proposed plant. Ask how the location, access and maintenance needs have been considered, and whether the available information is sufficient to assess the layout.
- What information about the proposed location would be helpful before work is considered?
- How will access to the plant area affect installation and future maintenance?
- Are there existing services, isolation points or access restrictions that should be identified early?
- What commissioning requirements need to be considered for the finished system?
- Who is authorised to approve work, and are there site or shutdown restrictions to plan around?
Products and supply names you may encounter
Product discussions and supply channels can introduce a range of familiar names. Examples customers may encounter include Rheem, Rinnai, Bosch, Thermann, Stiebel Eltron, Solahart, iStore, Reclaim Energy and EvoHeat. Reece, Galvins and Tradelink are also among the supply channels associated with this area.
These names are examples only. Product selection and installation planning should remain focused on the proposed plant, available site information, access and the requirements of the particular project.
Choose a Master Plumber with a clear project brief
Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with the Master Plumbers and Gasfitters Association of Western Australia. The directory is backed by the Association, which has represented Western Australia’s plumbing and gasfitting industry since 1901.
Choosing a Master Plumber helps consumers make a more informed choice of plumbing business for a property or project. For commercial and industrial work, share the available plant, access and approval information so the conversation can begin with the realities of the site.
Related commercial hot water work
Where the need is not a new gas or heat pump plant, related commercial hot water services may be more relevant. Options within the same service family include gas / heat pump plant repairs and maintenance, gas or solar hot water unit plant installation, circulating pump installation, tempering valve installation and thermostatic mixing valve installation.
Frequently asked questions
What is a heat pump water heater?
A heat pump water heater is usually a cylinder with a refrigeration-style compressor unit attached or nearby. It draws heat from surrounding air and transfers that heat into water stored in its tank.
Why does the proposed plant location matter?
Location affects practical matters including access, ventilation for heat pump equipment, nearby services, supports, clearances and future maintenance planning.
What information should I provide for a commercial heat pump hot water system installation?
Where available, provide drawings, specifications or photos of the proposed location, access dimensions, isolation points, nearby services, timing constraints and site access requirements.
Can commercial hot water plant include more than one component?
Yes. Commercial plant is often made up of several connected components rather than one standalone cylinder. Depending on the arrangement, this may include heaters, tanks, pumps, valves, control equipment and pipework.
What should an industrial site raise before installation planning?
Relevant information may include safety permits, process impacts, isolation requirements, environmental controls, shutdown windows and any critical production impacts.
How can Find a Master Plumber help?
Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with Master Plumbers WA, helping customers make a more informed choice for their property or project.