When portable equipment, leads or appliances need checking at a home or smaller private property, testing and tagging provides a recorded result attached to each item. It can help clarify the condition of equipment such as pumps, pressure washers, extension leads and portable appliances before decisions are made about repair, replacement or further investigation.
Certified Master PlumberNo reviews yetOpen · 24/7 Service
APG Plus is a South West-based plumbing, gas, electrical and facility maintenance business operating from East Picton and servicing Bunbury, surrounding towns and wider WA.
Established in 1991, APG Plus provides residential, commercial and industrial...
Testing And TaggingElectricalFull Electrical LicenseRcd TestingRestricted ElectricalResidential Plumbing+192 more
Testing and tagging is relevant when portable electrical appliances and leads need to be checked and their result recorded on a tag attached to the item. In a residential setting, this may involve tools, extension leads, pumps, pressure washers, portable equipment or office appliances used at a home or smaller private property.
Electrical testing and tagging can be particularly useful where equipment has an unclear history, a tag is missing, or there is uncertainty about the number of items that need attention. The outcome is more than a label: the work records the result of the check against the individual item.
What may be checked during testing and tagging
To test and tag electrical equipment, the work may involve checking its condition and taking readings or samples. The results are compared with expected operation so the plumbing business can identify whether repair, replacement or further investigation may be required.
Electrical safety concerns that may be identified include damaged insulation, failed earth continuity and faulty plugs. Wet or contaminated equipment and damaged leads are also common reasons to seek an electrical safety test and tag.
When a test and tag may be worth arranging
Customers commonly look for testing and tagging because a portable item appears damaged, has been exposed to wet or contaminated conditions, has no visible tag, or needs a documented result for a particular purpose. Some households and property managers may also need to account for multiple portable items without an asset register.
Testing intervals for different sites and conditions are prescribed in Australian Standards. A plumbing business can consider the equipment, its location and the reason for the test when discussing the work required.
Information that helps before testing begins
A concise list of equipment and clear access details can make the initial conversation more productive. Where available, gather the information that is relevant to the items being checked.
An asset register, previous reports, certificates or maintenance history
The exact equipment location and any access restrictions
The reason for testing, such as compliance, a fault, sale or insurance
A site contact, preferred report format and the level of urgency
The property address and practical access instructions
Photos or short videos of the item, surrounding area and existing labels
Any known safety concerns, whether the area is occupied, and relevant water or gas isolation status
For an appliance or lead with a visible issue, explain what has been noticed in plain language. This gives the plumbing business useful context without assuming the cause of the problem.
Testing and tagging within electrical work connected to plumbing assets
Testing and tagging sits within the Electrical service family for residential plumbing. Electrical-related work may be relevant where plumbing assets rely on power or controls, and where licensed work is needed in connection with those assets.
Equipment, components and supply channels can vary. Examples customers may encounter include Reece, Galvins, Tradelink, MM Electrical, Blackwoods, Lawrence and Hanson, Clipsal, Hager, Schneider Electric and Cabac. These names are associated with plumbing and electrical brands, products or supply channels; their presence does not determine what work is needed for a particular item.
Choosing a plumbing business with confidence
Testing portable equipment can involve electrical elements connected to plumbing assets. Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with the Master Plumbers and Gasfitters Association of Western Australia.
Choosing a Master Plumber helps consumers make a more informed choice of plumbing business for their property or project. Find a Master Plumber is backed by the Master Plumbers and Gasfitters Association of Western Australia, which has represented Western Australia’s plumbing and gasfitting industry since 1901.
Questions about testing and tagging
What does testing and tagging involve?
It checks portable electrical appliances and leads, then records the result on a tag attached to the item.
Which items may need testing and tagging?
Examples include tools, extension leads, pumps, pressure washers, portable equipment and office appliances.
What issues can a test identify?
The check may identify issues such as damaged insulation, failed earth continuity or faulty plugs. It may also identify whether repair, replacement or further investigation is required.
Why are tags sometimes missing?
A missing tag can be one of several reasons a customer seeks testing. Previous reports, certificates and maintenance records may provide helpful context where they are available.
What should I provide when I enquire?
Helpful details include the equipment location, any access restrictions, the reason for testing, previous records, photos of labels or visible issues, and a site contact.
How often is testing and tagging required?
Testing intervals for different sites and conditions are prescribed in Australian Standards. The equipment, location and purpose of the test are relevant to the discussion.
Use Find a Master Plumber to choose a plumbing business for testing and tagging or related electrical work connected to plumbing assets.
