Pelle Plumbing Pty Ltd is a locally owned plumbing and gas fitting business based in Halls Head, providing professional plumbing services throughout Mandurah and the Peel region. The business is recognised for delivering reliable workmanship, practical plumbing solutions and responsive customer service to residential and commercial clients. The company undertakes a broad range of plumbing services including general maintenance, gas fitting, drainage, new housing, renovations and plumbing repairs. With a focus on quality workmanship and dependable service, Pelle Plumbing Pty Ltd delivers solutions that are tailored to the needs of homeowners, builders and local businesses. As a proud member of The Master Plumbers and Gasfitters Association of WA, Pelle Plumbing Pty Ltd is committed to maintaining high professional standards while providing safe, compliant and reliable plumbing and gas fitting services throughout the Peel region.
Natural Gas Leaks in Mandurah, WA 6210
Established in 1980 in the Peel Region, Ballantynes Plumbing, Gas & Electrical has been delivering quality services for over 40 years.
Advertise with us
QA Plumbing Gas & Drainage is a Western Australian owned private company servicing the Peel region. Founded in 1975 as Diversified Contracting, servicing the Eastern Goldfields, the company has gained a reputation as a trusted, reliable and knowledgeable leader in the supply and installation of Plumbing and Specialised Pipe System services. Phil & Merice Brown along with their children Charlene & Glenn have been building honest, professional but personal plumbing solutions in Mandurah since early 2000. QA Plumbing supports the local community with involvement in Rotary, sporting clubs, school work placement, and using all local businesses and suppliers. Because QA Plumbing is part of the Mandurah community, it understands the requirements of its varied clients and also the necessity for prompt, professional and reliable service. The company is progressive, innovative and dedicated to delivering the best advice and cost effective services to install all manner of plumbing, from everyday household needs to light commercial. Since its humble beginnings, QA Plumbing Pty Ltd has earned a reputation of having a relentless desire to develop its people, quality, knowledge and service levels Striving for continuous improvement in Safety, Quality and Service, while developing career paths for our employees, has resulted in the formation of a very capable and loyal workforce.
Mandurah Plumbing and Gas Services provides professional plumbing and gas services throughout Mandurah and the Peel Region. With over 48 years of combined industry experience, the team specialises in plumbing maintenance, hot water systems, gas servicing, water filtration, septic and aerobic treatment systems, sewer conversions, renovations and light commercial work. Locally based, licensed and insured, they provide reliable service and quality workmanship across the Peel Region.
Seascapes Plumbing & Gas is a Mandurah-based plumbing business with more than 30 years of industry experience. Their fully licensed team provides plumbing and gas services for residential, commercial and maintenance clients, including blocked drains, hot water systems, gas servicing, toilet repairs, leak detection, backflow testing, roof and gutter leaks, tap repairs, commercial kitchens, bathrooms, shop fit outs, renovations and new builds. Reliable, experienced and locally based, Seascapes Plumbing & Gas is well suited to customers looking for a professional plumber across Mandurah, Peel and surrounding areas.
Who We Are: Family-owned licensed plumbers & gasfitters based in Erskine, WA. What We Do: Plumbing, gas fitting, bathroom renovations, waterproofing, drainage, emergency repairs. Where We Operate: Mandurah, Peel Region, surrounding WA suburbs. Why Choose Us: Licensed & insured, reliable service, 24/7 emergency response, skilled tradespeople, proven experience, strong community reputation. Contact: 0401 102 877 | oceansedgeplumbing.com.au
SDJ Plumbing & Gas is a Mandurah-based plumbing and gas fitting contractor with more than 15 years of experience servicing residential and commercial clients throughout Mandurah, Rockingham, Kwinana and surrounding areas. Specialising in drainage repairs, sewer conversions, gas fitting, bathroom renovations, hot water systems and general plumbing maintenance, the business provides reliable and professional solutions for homes and businesses across the Peel region. Known for quality workmanship, responsive service and strong local knowledge, SDJ Plumbing & Gas has built a reputation as a trusted plumbing partner delivering practical, compliant and cost-effective outcomes.
Related commercial gas services
When a suspected gas leak needs attention
Natural gas leaks in commercial and industrial premises require a safety-first response. A smell resembling rotten eggs, a hissing sound, failed appliance ignition, repeated appliance lockouts, pressure loss, abnormal gas bills, a supplier warning or a failed pressure test can each warrant investigation. In larger premises, the source may not be immediately visible because pipework can run through ceiling spaces, service ducts, risers, plant rooms, roof areas and external meter locations.
If gas can be smelt, treat the matter as urgent. Avoid ignition sources and do not operate electrical switches or appliances. Move away from the affected area and contact ATCO, the gas supplier or an appropriately licensed gasfitter. Do not try to locate, tighten, repair, test or re-light a commercial gas system yourself.
Where natural gas leaks can occur
Natural gas leak work concerns suspected leaks across gas pipework and connected equipment. Depending on the premises, this can involve meters, regulators, valves, appliance connections, boilers, hot water plant, commercial kitchen equipment and other gas-fired systems.
Restaurants, hotels, clubs, schools, hospitals, aged care facilities, apartment buildings, laundries, workshops and plant rooms can each have different access arrangements and operational constraints. A gasfitter may also need to work around meter enclosures, risers, roof plant areas or external service compounds.
The fact that a smell or fault is noticed in one place does not establish the source. Investigation may consider the supply, meter, regulator, pipework, appliance connection, valve, control, burner train or appliance itself.
What commercial natural gas leak detection can involve
Commercial natural gas leak detection starts with the reported symptoms, the asset involved and the site conditions. A gasfitter may isolate sections of an installation, carry out gas pressure testing, inspect accessible connections and check relevant regulators before determining the appropriate repair scope.
- Emergency isolation and make-safe works
- Gas pressure testing and leak tracing on exposed or concealed pipework
- Checks of regulators, valves, unions and appliance connections
- Commercial kitchen gas rail and appliance connection testing
- Leak investigation for boilers, water heaters and plant-room equipment
- Assessment of safe operation before gas is restored following repair
Where a commercial gas leak repair is required, the work may involve repairing or replacing failed fittings, valves or pipework. The scope depends on the asset, symptoms, isolation points, access and consequence of failure; it may be a service call, a planned repair or a larger item requiring further coordination.
Managing disruption at a business or facility
Gas work at a commercial site may need to fit around tenants, trading activity, plant access and shutdown restrictions. In some circumstances, staged shutdowns, tenant notification, access permits, after-hours attendance or coordination with the gas network operator may be needed.
For emergency commercial gas leak repair, let the plumbing business know who can authorise urgent work and whether the affected area is occupied. Facility managers, strata managers, business owners, maintenance coordinators and asset managers can help make the first discussion more productive by identifying the relevant asset and access arrangements.
Information to have ready
Clear site information helps a gasfitter understand the reported issue and plan access. Provide what is safely available; do not place yourself at risk to collect details or images.
- Give the site address, contact person and access instructions.
- Describe where the smell, sound or fault was first noticed and whether any gas appliances are still operating.
- Identify the gas meter location, gas type and affected appliance or plant where known.
- Share appliance make, model and serial details, along with photos of labels, meters, regulators, visible pipework or damaged areas where safe.
- Advise whether ATCO or the gas supplier has attended and whether a warning notice has been issued.
- Outline shutdown restrictions, induction requirements, permits, permitted working hours and the person authorised to approve repairs.
Asset IDs, drawings, manuals, past service reports and maintenance history can also assist where the affected equipment forms part of a larger facility system.
Gas leak testing and repair in commercial settings
Commercial gas leak testing may involve checking the installation after sections have been isolated and examining connections or equipment associated with the reported fault. Following repair, recommissioning and safe-operation testing may be needed before gas is restored.
Because the condition of pipework and equipment cannot be determined from symptoms alone, avoid assuming that a failed appliance, a pressure issue or an odour identifies a particular component. The investigation should establish the relevant source and the repair required.
Gas products and equipment customers may encounter
Commercial sites can contain equipment and components from a wide range of manufacturers and supply channels. Examples customers may encounter include Kleenheat Gas and Origin in connection with gas supply, Rinnai, Rheem, Bosch, Vulcan and Dux for gas-fired water-heating equipment, and Bromic, Hobart, Cookon, Goldstien and Luus in commercial kitchen environments. Reece, Galvins and Tradelink are also names customers may see in relation to plumbing products and supply channels.
Product names and labels can be useful details when reporting a fault, particularly where an appliance, boiler, water heater, regulator or kitchen item is involved. Their presence does not by itself identify the cause of a suspected leak or the repair required.
Choose a plumbing business with clearer information
Gas fitting covers the supply, connection, testing and repair of natural gas and LPG systems and appliances. In commercial settings, gas work also needs to account for asset criticality, site access, safety and disruption to operations. Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with the Master Plumbers and Gasfitters Association of Western Australia.
Find a Master Plumber is backed by the Association, which has represented Western Australia’s plumbing and gasfitting industry since 1901. Choosing a Master Plumber helps consumers make a more informed choice of plumbing business for their property or project.
For a related requirement, consider Natural Gas Installations, Natural Gas Repairs, or the wider Gas Fitters & Gas Plumbing service family.
Frequently asked questions
What are possible signs of a natural gas leak?
Possible signs include a rotten egg smell, hissing, failed appliance ignition, repeated appliance lockouts, pressure loss, abnormal gas bills, a supplier warning or a failed pressure test. These signs do not establish the source of the issue.
What should we do if gas can be smelt at our premises?
Treat it as urgent: avoid ignition sources, do not operate electrical switches or appliances, move away from the affected area, and contact ATCO, the gas supplier or an appropriately licensed gasfitter. Do not attempt repairs or re-lighting.
Can the leak be inside concealed pipework?
It can be difficult to identify the location from symptoms alone. Commercial gas pipework may run through ceiling spaces, service ducts, risers, plant rooms, roof areas or external locations before reaching an appliance.
What details should we provide when reporting a suspected gas leak?
Provide the site address, symptoms and location, meter location, affected equipment details where known, supplier attendance or warning information, access requirements, shutdown restrictions and the urgent-work authoriser.
What can commercial gas leak testing involve?
It may involve isolation, pressure testing, leak tracing, inspection of connections and checks of relevant valves or regulators. The work required depends on the site, affected assets and reported symptoms.
Why might a site need coordination before gas work proceeds?
Commercial premises may have tenants, operational restrictions, permits, induction requirements, restricted access or shutdown windows. These details can affect how investigation and repair are arranged.
For natural gas installation work or faults not identified as a suspected leak, use the related commercial gas service pathways to choose a plumbing business that suits the work required.