Triple T Plumbing and Civil is a Western Australian-owned contractor specialising in commercial hydraulics, plumbing and civil drainage services for major construction and development projects. Based in Balcatta and operating across Perth and WA, Triple T has more than 25 years of industry experience and delivers hydraulic and civil solutions for commercial, residential, industrial, infrastructure, aged care, health and education projects. The company provides a broad range of services including commercial plumbing, civil drainage, stormwater and sewer systems, wet fire services, siphonic drainage, rainwater harvesting, Water Corporation sewer and water extensions, and design-and-construct hydraulic packages. Led by Managing Director Peter Banovich, Triple T is known for technical capability, reliable project delivery, strong project management and a collaborative approach with builders, developers and construction partners. The business places a strong focus on quality, safety, accountability and delivering high-standard project outcomes.
Gas / Heat Pump Plant Installations in Stirling, WA 6021
Jakovich AR & BL is a locally based plumbing and gas fitting contractor operating from Gwelup and servicing residential and commercial customers throughout the Perth metropolitan area. The business provides dependable plumbing services supported by professional workmanship and a commitment to customer satisfaction. Its capabilities include domestic plumbing maintenance, commercial construction, drainage, gas fitting, housing construction, renovation plumbing and backflow prevention. This broad range of services enables Jakovich AR & BL to undertake projects ranging from routine maintenance and repairs through to new building and renovation work. As a proud member of The Master Plumbers and Gasfitters Association of WA, Jakovich AR & BL is committed to maintaining high industry standards while delivering reliable, compliant and practical plumbing solutions for customers across Perth.
Advertise with us
Routy's Plumbing & Gas (RPG) is a proudly Western Australian-owned plumbing contractor providing commercial, civil and residential plumbing services across Perth and regional WA. Since its establishment in 2015, the company has grown into a multi-disciplinary business specialising in commercial construction plumbing, underground drainage, stormwater systems, gas fitting, excavation and preventative maintenance. With dedicated construction, maintenance and project teams supported by a modern fleet of specialised equipment, RPG delivers reliable, high-quality hydraulic solutions for projects of all sizes. Recognised for its professionalism, technical expertise and commitment to safety, Routy's Plumbing & Gas continues to build long-term relationships with builders, developers and clients throughout Western Australia.
ONN1 Services is a leading Western Australian provider of integrated plumbing, gas fitting and electrical services, delivering specialist solutions across the mining, commercial, industrial and maintenance sectors. Known for its dual-trade capability, technical expertise and commitment to safety, the company specialises in commercial plumbing, industrial gas fitting, hydraulic services, preventative maintenance and mining infrastructure projects. With more than 50 skilled professionals and a strong focus on innovation, ONN1 Services delivers practical, efficient and cost-effective infrastructure solutions that minimise downtime and maximise operational performance for clients throughout Western Australia.
At Majestic Plumbing, we support the high-performance needs of industrial and infrastructure facilities with reliable, safety-first plumbing solutions. Whether it’s a large-scale factory, a mining site, or an airport terminal, we understand the complexities of these environments and deliver services built for efficiency, compliance, and minimal disruption.. With over 40 years of experience, we have built a reputation for excellence, reliability, and innovation in commercial and industrial plumbing. Businesses across Perth trust us to deliver high-quality solutions that ensure compliance, efficiency, and long-term performance.
Litas Mainstone Plumbing & Gas is an award-winning Perth plumbing contractor delivering premium residential, commercial and industrial plumbing and gas fitting services across the metropolitan area. Established in 2005, the company has built an outstanding reputation for quality workmanship, innovative solutions and exceptional customer service, undertaking projects ranging from luxury home builds and renovations to large-scale commercial and industrial developments. Founded by Chris Litas and Chad Mainstone, the business combines decades of industry experience with a highly skilled team of licensed plumbers and gas fitters. Litas Mainstone is recognised for its collaborative approach, technical expertise and commitment to delivering reliable plumbing solutions that stand the test of time.
Techworks Plumbing is a Perth-based commercial plumbing contractor operating within the broader Techworks Group alongside Techworks Electrical. Established in 2017, the company delivers maintenance and project services across government, education, transport and commercial sectors throughout the Perth metropolitan area. Known for its integrated plumbing and electrical capability, Techworks provides practical end-to-end solutions for facility managers, local councils, universities and infrastructure clients. The business has built a strong reputation for reliable service, collaborative culture, long-term staff retention and a strong commitment to apprenticeship training and workforce development.
Hindmarsh Plumbing Services — Trusted Commercial Hydraulic Specialists With over 50 years of industry experience, Hindmarsh Plumbing delivers commercial plumbing and hydraulic services across projects of every scale — from reactive service works through to multi-million dollar construction contracts, including defence and mining sectors. Core capabilities: * Commercial plumbing construction and hydraulic services * Reactive and preventative maintenance (24/7) * Hydraulic design and drafting * Water treatment and Legionella management * Gas fitting and gas infrastructure * Backflow testing and prevention * Stormwater and drainage systems * Leak detection and pipe location * Thermostatic mixing valve servicing * Defence and government infrastructure * Mining and resources sector works
Zambezi Plumbing & Gas Pty Ltd is a family owned and operated business in Perth. Established in 2007, we are one of Perth’s quality Master Plumbers. We pride ourselves on the standard of our work, timeliness, service to our customers and focus on building lifelong relationships.
MI Plumbers are highly skilled commercial plumbers who take pride in completing works in a safe and professional manner to the highest of standards. Our modern day approach to plumbing construction means that your project benefits from the latest materials and techniques. We are the industry leaders in high quality construction plumbing, commercial maintenance and retail fit-outs. We remain at the forefront of plumbing technology and our experience allows us to recommend the right products and installation methods for your projects. Perth’s leading facility mangers rely on us to maintain and manage their assets through our cloud based systems. We specialise in difficult, ongoing issues and provide preventative maintenance to avoid costly interruptions and repair bills. Whatever the task, we can design and install a custom plumbing solution that’s right for you.
Plan commercial hot water plant around the site
A commercial hot water plant installation is rarely a simple swap of one unit for another. Larger systems may serve multiple fixtures, tenancies, rooms or operational areas, and can involve more than one connected component. A clear brief gives a plumbing business a better starting point for considering the proposed plant, its location and the practical constraints of the site.
Gas / heat pump plant installations are part of commercial hot water systems. Depending on the proposed arrangement, the work may relate to gas-fired water heating plant or a heat pump water heater. The right conversation starts with what the site needs, where the plant is proposed and how people will access, operate and maintain it after installation.
Understanding heat pump water heater plant
A heat pump water heater is usually a cylinder with a refrigeration-style compressor unit attached or located nearby. It draws heat from surrounding air and transfers that heat into water stored in the tank. For that reason, it is commonly located outside or in a ventilated plant area.
The equipment uses a compressor, fan, evaporator and heat exchanger. Its placement is an important practical consideration: the proposed area needs to suit the plant layout, access and ventilation arrangements. Existing services nearby, site access and the eventual maintenance approach are useful matters to raise early.
What a commercial hot water plant installation may involve
Commercial hot water plant can be made up of several connected components rather than one standalone cylinder. Depending on the system, customers may encounter storage tanks, heat pumps, gas-fired water heaters, circulating pumps, valves, relief valves, control equipment and insulated pipework.
For a commercial hot water plant installation, a plumbing business will usually confirm the duty or layout first, then consider isolation, access, supports, falls, clearances, commissioning requirements and how the completed system will be maintained. These matters are especially relevant where plant is located in a basement plant room, rooftop area, external compound, service cupboard, laundry, commercial kitchen, mechanical services room or dedicated enclosure.
A commercial gas hot water system installation may have different plant and site considerations from a commercial heat pump hot water system installation. Explaining the intended system, the building area it is expected to serve and any project constraints helps keep the discussion focused on the proposed work.
Details to have ready before contacting a plumbing business
Good site information can help a Master Plumber or plumbing business understand the project before attending. It is useful to prepare what is already available rather than trying to resolve every detail in advance.
- Drawings, specifications or photos of the proposed plant location.
- The preferred product or fixture service, if one has already been selected.
- Access dimensions, nearby existing services and known isolation points.
- The site address, a contact person and practical access instructions.
- Timing requirements, tenant access or project-program constraints.
- Site induction requirements, parking or loading details, and permitted working hours.
- For existing equipment, photos of labels or data plates, plus available make, model and serial-number information.
On industrial sites, it may also be important to identify shutdown windows, permit requirements, process impacts, environmental controls or critical production considerations. These details give the plumbing business context for planning around site operations.
Questions worth asking during installation planning
Installation decisions are easier to compare when the discussion is specific to the property and proposed plant. Ask how the location, access and maintenance needs have been considered, and whether the available information is sufficient to assess the layout.
- What information about the proposed location would be helpful before work is considered?
- How will access to the plant area affect installation and future maintenance?
- Are there existing services, isolation points or access restrictions that should be identified early?
- What commissioning requirements need to be considered for the finished system?
- Who is authorised to approve work, and are there site or shutdown restrictions to plan around?
Products and supply names you may encounter
Product discussions and supply channels can introduce a range of familiar names. Examples customers may encounter include Rheem, Rinnai, Bosch, Thermann, Stiebel Eltron, Solahart, iStore, Reclaim Energy and EvoHeat. Reece, Galvins and Tradelink are also among the supply channels associated with this area.
These names are examples only. Product selection and installation planning should remain focused on the proposed plant, available site information, access and the requirements of the particular project.
Choose a Master Plumber with a clear project brief
Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with the Master Plumbers and Gasfitters Association of Western Australia. The directory is backed by the Association, which has represented Western Australia’s plumbing and gasfitting industry since 1901.
Choosing a Master Plumber helps consumers make a more informed choice of plumbing business for a property or project. For commercial and industrial work, share the available plant, access and approval information so the conversation can begin with the realities of the site.
Related commercial hot water work
Where the need is not a new gas or heat pump plant, related commercial hot water services may be more relevant. Options within the same service family include gas / heat pump plant repairs and maintenance, gas or solar hot water unit plant installation, circulating pump installation, tempering valve installation and thermostatic mixing valve installation.
Frequently asked questions
What is a heat pump water heater?
A heat pump water heater is usually a cylinder with a refrigeration-style compressor unit attached or nearby. It draws heat from surrounding air and transfers that heat into water stored in its tank.
Why does the proposed plant location matter?
Location affects practical matters including access, ventilation for heat pump equipment, nearby services, supports, clearances and future maintenance planning.
What information should I provide for a commercial heat pump hot water system installation?
Where available, provide drawings, specifications or photos of the proposed location, access dimensions, isolation points, nearby services, timing constraints and site access requirements.
Can commercial hot water plant include more than one component?
Yes. Commercial plant is often made up of several connected components rather than one standalone cylinder. Depending on the arrangement, this may include heaters, tanks, pumps, valves, control equipment and pipework.
What should an industrial site raise before installation planning?
Relevant information may include safety permits, process impacts, isolation requirements, environmental controls, shutdown windows and any critical production impacts.
How can Find a Master Plumber help?
Find a Master Plumber connects customers with Master Plumbers and plumbing businesses associated with Master Plumbers WA, helping customers make a more informed choice for their property or project.